29
ENGLISH
The message "CLE" ("CLEAN") will be displayed
throughout the drain cycle:
•
After a few minutes, 3 beeps indicate the end of
thecleaning cycle and “END” blinks on the display:
•
Switch off the appliance by pressing button “A”
(Table 2 “Control panel”).
•
Switch off at the mains.
•
Close the water supply cock.
•
Before operating the appliance again, replace the
components that have been removed.
Cleaning the nozzle jets
•
Remove the upper and lower wash arms "F" and
rinse arms "I", undoing the ring nut "H" (Figure 25).
•
Unscrew plugs “L” (Figure 25) from the rinse jets.
IMPORTANT
Descale the rinse jets “I” (Figure 27) every month
using vinegar or a descaling agent.
•
Remove jet “P” (Figure 26) by turning it clockwise
and pulling it out.
•
Unscrew plugs “R” (Figure 26) from the side jets.
•
Carefully clean the washing and rinse jets and
clean everything with hot water and neutral deter-
gent/detersive, if necessary using a soft brush or
sponge. In particular, for the jet "P" (Figure 27) use
warm water and detergent, and a soft brush "Z" if
necessary (Figure 27). Do not use sharp imple-
ments to clean the nozzle holes, which could
otherwise be damaged.
Cleaning the wash pump filter
•
Remove the filter “E” and clean away any remained
food.
Upon completion of cleaning operations, replace the
parts removed previously.
J8.2
Exterior cleaning
Before carrying out any cleaning operations, turn off
the power at the mains.
IMPORTANT
Clean the stainless steel surfaces using warm
soapy water; never use detergents containing
abrasive substances nor steel scrapers, common
wire wool, brushes or scrapers; rinse thoroughly
using a wet cloth and carefully wipe dry. Clean the
control panel using a soft damp cloth and a neutral
detergent if necessary.
To reduce the emission of pollutants into the environ-
ment, clean the appliance (externally and where
necessary internally) with products having a biodegra-
dability of over 90%.
Leave the hood raised whenever the appliance is not in
use.
Figure 25 Rotating wash arms and rinse arms
Figure 26 Fixed wash arm removal
CLE
End
H
F
I
L
P
R
R
Figure 27 Fixed wash arm cleaning
P
Z
Z
Z
Z
E