• The measured sound level emitted “A“ does not exceed 70 dB (“A“).
• Turn the appliance off in case of fault or poor operation.
• Do not use products (even if diluted) containing chlorine (sodium
hypochlorite, hydrochloric or muriatic acid, etc.) to clean the appliance
or the floor under it.
• Do not use metal tools to clean steel parts (wire brushes or Scotch Brite
type scouring pads).
• Do not allow oil or grease to come into contact with plastic parts. Do not
allow dirt, fat, food or other residuals to form deposits on the appliance.
• Do not spray water or use steam to clean the equipment.
• Do not store or use gasoline or other flammable vapours, liquids or
items in the vicinity of this or any other appliance.
• Do not spray aerosols in the vicinity of this appliance while it is in
operation.
• Never check for leaks with an open flame.
A
A..4
4
G
Ge
en
ne
erra
all ssa
affe
ettyy rru
ulle
ess
Instructions for use and maintenance
• Risks mainly of a mechanical, thermal and electrical nature exist in the
machine. Where possible the risks have been neutralised:
– directly, by means of adequate design solutions.
– indirectly by using guards, protection and safety devices.
• During maintenance several risks remain, as these could not be
eliminated, and must be neutralised by adopting specific measures
and precautions.
• Do not carry out any checking, cleaning, repair or maintenance
operations on moving parts. Workers must be informed of this
prohibition by means of clearly visible signs.
• To guarantee machine efficiency and correct operation, periodical
maintenance must be carried out according to the instructions given in
this manual.
• Make sure to periodically check correct operation of all the safety
devices and the insulation of electrical cables, which must be replaced
if damaged.
• Extraordinary machine maintenance operations must only be carried
out by specialized Technicians provided with all the appropriate
personal protection equipment (safety shoes, gloves, glasses,
overalls, etc.), tools, utensils and ancillary means.
• Never operate the machine, removing, modifying or tampering with the
guards, protection or safety devices.
7
