Electrohome EANOS700, Instruction Manual

Page: 9 / 36

- 9 -
OPERATION
INSERTING AND PLAYING A CD
1. Press the POWER button on the front panel to turn the system ON, set the
volume to a low level. Press the CD/USB button.
2. Press the OP/CL button to open the CD drawer. Place a CD in the tray, with
the printed label facing up. Press the OP/CL button again to close the CD
drawer.
3. The disc will spin for a few seconds while the player is reading the disc
and the total track number will appear in the display. The unit will start
playing the first track of the disc. Adjust the VOLUME control to set the
volume as desired.
4. To skip forward or backward through the tracks on the disc, press the
UP/F.F or DN/F.R buttons.
5. Press the PLAY/PAUSE button to pause playback. The PLAY/PAUSE indicator
will blink in the display. Press again to resume playback. When the disc is
through playing, it will stop rotating.
6. To stop playback entirely, press the STOP button.
USB OPERATION
7. Press the CD/USB button first and the FUNCTION button second to enter
USB mode, the "- - -" and USB icon will appear on the LED screen.
8. Insert a USB device into the USB input. The player will begin to play the
first song of the USB.
9. The MP3 icon will be shown while MP3 is detected.
10. The PLAY/PAUSE, DN/F.R/UP/F.F and STOP functions are the same as in CD play mode.
You may press the FUNCTION button on the unit or the PLAY/PAUSE button on the remote control to
change the playing mode between CD and USB.