Electrohome EANOS700, Instruction Manual

Page: 11 / 36

- 11 -
OPERATION OPERATION
LISTENING TO THE RADIO
1. Press the POWER button on the front panel to turn the system ON, set the volume to a low level. Press
the AM or FM button to select the band. The tuner backlighting will come on.
2. Rotate the tuning control to select a station. The backlight behind the AM/FM dial will light. If tuned
to a strong FM station, the FM Stereo indicator will light and the sound will be in stereo. If tuned to a
weaker FM station, the reception will automatically switch to mono.
AM RECEPTION
The AM antenna is inside the cabinet. If reception is unsatisfactory try repositioning the cabinet slightly for
the strongest signal.
FM RECEPTION
The wire antenna is located on the back cabinet. If necessary adjust the position and direction of this
antenna for the best reception.
PLAYING RECORDS
This system includes a full-size, 3-speed, belt-drive turntable that plays 33, 45 and 78 RPM records.
1. Press the POWER button on the front panel and set the volume to a low level. Make sure that you have
removed the stylus cover from the stylus and have released the Tone Arm Lock.
2. Set the turntable speed switch to the appropriate speed: 33, 45, or 78 RPM. Set the record onto the
turntable. If you are playing 45 RPM singles, place the 45 RPM adapter on the center spindle.
3. Raise the cue lever to lift the tone arm off its rest. Move the tone arm to the edge of the record. The
turntable will start automatically. Use the cue lever to gently lower the tone arm onto the record.
4. Adjust the VOLUME control to set the volume as desired.
5. To turn the system OFF, press the POWER button again and the POWER indicator will turn off.
Do not turn or stop the turntable manually. Moving or jarring the turntable without securing the tone
arm clamp could result in damage to the tone arm or stylus.
RECORDING FROM A CD ONTO THE USB DEVICE
1. With the unit on and a USB drive inserted, press the CD/USB button and insert the desired CD; playback
will start automatically.
2. Select a track using the UP/F.F or DN/F.R buttons. Press the RECORD button twice to start recording; the
USB icon will flash in the display.
3. The song number and folder number of the recorded track will appear on the screen. Recording will
continue to until you press STOP.