Electrohome EANOS700, Instruction Manual

Page: 13 / 36

- 13 -
OPERATION CARE AND MAINTENANCE
IMPORTANT: Avoid touching the stylus itself.
REPLACING THE STYLUS:
1. Lift the tone arm off the tone arm rest.
2. At the front end of the tone arm, place the tip of your fingernail between the stylus holder and the
cartridge housing as shown, press down on the stylus holder until it separates from the
cartridge housing.
3. Completely remove the stylus holder with worn stylus and discard it.
4. Place the new stylus holder with stylus under the cartridge housing. First, press upward on the back
side of the stylus holder, and then press up on the front edge of the stylus holder until it snaps into place
on the cartridge housing.
IMPORTANT!
To protect the turntable from damage during transportation, a silver transit screw is located
at the upper right of the turntable platform.
1. Before playing, please use a screwdriver to turn the transit screw in
clockwise direction (screw going down) completely to unlock
the turntable.
2. To lock the turntable again for transportation, please turn screw in
counter-clockwise direction.