CARE AND MAINTENANCE
CARE AND MAINTENANCE
Your air conditioner is provided with a filter cleaning indicator.
When the indicator (F)lights up, the filters should be removed for
cleaning.
To remove the air filters, lift up the panel, push the air filters up
slightly to unlock them. pull out the filters, Clean the filter by
washing in warm soapy water and dry thoroughly, align and fit
the filters in place, close the panel by pushing it in the center to
lock it in place.
Reset button ( I ) to turn off indicator ( F ).
The electrostatic filter should be removed from the unit and
cleaning once three month. The procedure is shown as
following;
1. Open the front panel
2. Push the hook on the filter and pull out the electrostatic filter
(Fig 1 )
3. Wash the filter with the warm soapy water and dry thoroughly
4. Push the electrostatic filter into the right position
5. Close the front panel
Note: the above procedure is used for cleaning the
electrostatic filter.
Before performing any maintenance procedure, make
sure to disconnect the air conditioner from the power.
PURIFICATION FILTER REPLACEMENT
The air purifying filter should be removed form the unit and replaced once a year, show as following:
1 pulling out the filter. (Fig 2 )
2 replacing the filter in its place.
Wipe the unit with a soft dry cloth or clean it using a vacuum cleaner.
Do not use hot water or volatile materials which could damage the surface of the air conditioner.
Make sure there are no obstacles blocking the flow of inlet or outlet air, in both indoor and outdoor units.
Make sure the power is properly connected.
Indoor unit and remote control must be at least 1 meter away from a TV, radio or any other home electronic
appliance.
Protect the inner unit from direct sun or lighting.
6
CLEANING THE AIR FILTER
PROTECT THE ELECTRONIC SYSTEM
AT THE BEGINNING OF THE SEASON
CLEANING THE AIR CONDITIONER
PURIFICATION FILTER REPLACEMENT
CLEANING THE ELECTROSTATIC FILTER
DO NOT OPERATE THE UNIT WITHOUT FILTERS!
