NAME OF EACH PART
NAME OF EACH PART
INDOOR UNIT
3
3
1
2
3
4
5
6
7
8
9
10
11
Air intake grill
Air filter
Air purifying filter
Air outlet
Supply air flap louver
horizontal Air flow
Ionizer(optional)
On unit operation
Electrostatic filter (optional)
Unit's indicatiors
Power cord (optional)
If the air-conditioner can not be operated by the
Remote Control unit,it can be turned on for
cooling or heating, or completely turned off, by
pressing MODE button(K) on the air-
controller.The MODE button will change the
operating status of the unit between-COOLING-
HEATING-STAND BY positions.Every time it is
pressed, MODE button(K), (J)or(L) will light up
respectively, to indicate in which mode the air-
conditioner operates.
A. IONIZER INDICATOR
Lights up during ionizer on .
B. IONIZER ON/OFF SWITCH
Used to switch the ionizer on/off.
C. STAND-BY AND OPERATION
INDICATOR
Lights up in red when connected to
power.
Lights up in green during operation.
D. IONIZER INDICATOR
Lights up during the Ionizer
operation.
E. TIMER INDICATOR
Lights up during timer and sleep
operation.
F. FILTER INDICATOR
Lights up when air filter requiers
cleaning
G. SIGNAL RECEIVER
Receive signals from the remote
control.
H. FRESH AIR
OPERATION BUTTON
Used to switch the Fresh air on or
off.
I. RESET BUTTON
Press to turn off the filter indicator
and to reset the filter function,after
the cleaned filter has been
reinstalled.
Press to cancel the buzzer
announcer.
J. COOLING INDICATOR
Lights up only when Mode(K) is
pressd.
K. UNIT MODE BUTTON
Used to switch the unit off or to rurn it
on for cooling or heating without the
remote control.
L. HEATING INDICATOR
Lighrs up only when Mode(K) is
pressed.
M. ELECTROSTATIC FILTER SAFETY
BUTTON
Turn off the Electrostatic filter when
you open the grille.
O. STAND-BY INDICATOR
Lights up in red when connected to
power.
P. OPERATION INDICATOR
Lights up in green during operation.
Controller and Display I (unit with Ionizer & ESF fuction)
Controller and Display II (unit without Ionizer & ESF fuction)
