background image

Page 9

 

HEAT PUMP FEATURES 

 

CABINET – Your heat pump’s cabinet is made from a maintenance-free, 
rust-free plastic that is UV resistant.  It will last for years and any dirt or 

dust may simply be wiped away with a cloth or sprayed off with a water 

hose.  The use of a product such as Armor- All will restore its natural luster. 

DO NOT USE CLEANERS THAT CONTAIN ALCOHOL.  

 

CONTROL – State-of-the-art LCD readout control.  Displays mode and 
temperature of the water for ease of operation.  No programming to learn.  

Dual thermostats allow user to set pool and spa temperatures.  The control 

is self-diagnostic and will display a fault if there is a problem.  Other 

features include: lockout, spa timer, automatic low temperature defrost and 

remote control capabilities. 
 

ULTRA-QUIET – The unit is equipped with a low RPM fan motor in 

combination with a deep drawn venturi to ensure whisper quiet operation. 

 

HIGH EFFICIENCY – The heat pump utilizes the latest in compressor 

technology to produce the highest efficiency available when coupled with 
the over-sized enhanced fin evaporator coil. 

 

EASE OF INSTALLATION - The unit is equipped with easy-to-install, 

hand-tightened unions for a quick and trouble-free installation.  The unions 

will accept 2” PVC piping.  The electrical connection is made with one entry 

directly into the control box for a quick hook-up and a neat appearance. 
 

EASY ACCESS – The heater was designed for quick and easy access for 

installation and diagnosis.  The service panel is removed with two screws 

and access to all service connections is right up front and easy to reach.  

This allows the installation and service to be done quickly and efficiently – 

so valuable time is not wasted.   

Summary of Contents for Swimming Pool Heat Pump
















Reviews: