Page
9
of 12
www.eldoradostone.com/outdoor
|
1.800.925.1491
INSTALLATION GUIDELINES
STEP 12:
CHIMNEY EXTENSION
(IF APPLICABLE)
A)
Chimney Extension
i)
Add adhesive to the top of the Chimney Section
where the Chimney Extension will be placed.
ii)
Lift the Chimney Extension into place and line
up bolt holes.
iii)
Add 4 bolts, 8 washers and 4 nuts and then
tighten a ¼ turn past snug.
B)
Metal Flue Liner Extension
i)
When adding a Flue Liner extension, connect the
two Metal Flue Liners together as described below.
ii)
Place the Metal Flue Liner Extension (the one
without the spark arrester) on the bottom and
the regular Metal Flue Liner Top Section (with
spark arrester) on top.
iii)
Use the 4 sheet metal screws provided to attach
the two sections together from the inside.
STEP 13:
METAL FLUE LINER –
TOP SECTION(S)
A)
Insert Flue Liner Top Section (with the spark
arrester at the top) through the top opening of the
Chimney Section. If using a Chimney Extension,
this will be two Flue Liners connected as one with
the spark arrester on the top section.
B)
Enter through the fireplace and connect the Flue Liner
Top Section to the Flue Liner Bottom Section using
(4) sheet metal screws provided.
INSTALLATION/ OPERATION INSTRUCTIONS
Model OLPLSFP04 Outdoor Fireplace
