Page
3
of 12
www.eldoradostone.com/outdoor
|
1.800.925.1491
PRODUCT USAGE
The OLPLSFP04 is designed to burn solid woods or gas outdoors. This unit is not
designed to sit directly against combustible materials. This unit is not designed to be
built into a wood structure. The Eldorado Outdoor model number OLPLSFP04 is
designed as an outdoor unit only.
The OLPLSFP04 is shipped with the appropriate flue liner and has been tested to
comply with UL-127/ ULC-S610.
Use solid wood, plumbed propane or natural gas fuel only.
Gas log appliances used with this product must be approved for outdoor use.
MODIFICATION OF FIREPLACE
The addition of extensions may be accomplished by using the Eldorado Outdoor
extensions (shown on the first page), metal framing or concrete block. There is no
clearance or airspace required when using extensions, metal framing or concrete block.
CHIMNEY EXTENSIONS
The standard height of 6 ft. 8 in. is the height tested to achieve proper draft characteristics.
If conditions exist that require additional chimney height, please follow all local building
codes and regulations during installation.
The addition of the concrete extension OLPLSFP05 requires an additional flue
liner which is included in OLPLSFP05. A maximum of two OLPLSFP05 Chimney
Extensions can be used on top of the OLPLSFP04 Chimney Section.
If a prefabricated metal chimney is chosen, it must be tested and found compliant with
UL-103. It must be installed in accordance with chimney manufacturer’s instructions
and use all necessary parts specified for use with the listed chimney system.
Chimney termination must be a minimum of 2 ft. above any combustible structure
within 10 ft. of the chimney termination.
INSULATION
This product is not designed to be “packed” by insulation. In the event air spaces exist
between this product and CMU or metal framing construction, do NOT fill these voids
with an insulating product.
INSTALLATION/ OPERATION INSTRUCTIONS
Model OLPLSFP04 Outdoor Fireplace
