manualshive.com logo in svg

elddis XPLORE, Owner'S Handbook Manual

Share
Download
elddis XPLORE Owner'S Handbook Manual Download Page 75

8-42

HOW TO USE YOUR CARAVAN’S EQUIPMENT

Lift up Bunk Beds (530 4 berth
option only)

Where fitted, the foldaway bunk has been
tested to 70kg (11 stones) and has a
recommended limit of 57kgs (9 stones).
Safety features are included but care
should always be taken, particularly if the
child is under 3 years of age. Bunks are
not suitable for children under 6 years old
without supervision.

The following step by step guide illustrates
how to assemble the bunk bed.

1. Pull the top edge of the bunk towards

you.

2 & 3 With your left hand on the bottom

edge, lift upwards and towards you,
while your right hand keeps the bunk
steady.

1

2 & 3

4 & 5 As the left hand passes the pivot point

allow the right hand to slowly lower
the bunk into the rest position.

6

Fold the two part bunk into position.

7

Fit the safety boards into position.

4 & 5

6

7

Summary of Contents for XPLORE







































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands