manualshive.com logo in svg

elddis XPLORE, Owner'S Handbook Manual

Share
Download
elddis XPLORE Owner'S Handbook Manual Download Page 68

8-35

HOW TO USE YOUR CARAVAN’S EQUIPMENT

WARNINGS

•

Cold Weather Use - to prevent freezing
during cold weather use, add
antifreeze to the toilet system fresh
water tank. Use a non-toxic (propylene
glycol) type of antifreeze. Refer to
chart on container to obtain level of
protection.

•

Warmer weather or longer intervals
between emptying the waste tank may
require additional toilet fluid. Use only
Thetford toilet fluid to achieve the best
results.

CAUTIONS

•

Never add toilet fluid directly into toilet
bowl.

•

Do not use strong household detergents
or cleaners that contain chlorine, solvents
or acid contents.

•

High Altitude and Hot Weather Use - with
large temperature differences and
changing heights during towing, over
pressure can start to build up in the
waste holding tank, causing contents to
splash upward upon opening the valve
blade if opened too fast.

Summary of Contents for XPLORE







































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands