RGK02
Operating Instructions
8
ON/OFF (2-button operation)
With 2-button operation, the receiver switches directly ON and OFF.
Keycode A: ON
Keycode C: ON
Keycode B: OFF
Keycode D: OFF
A, B as well as C and D are assigned automatically. Only one of these keycodes must
be programmed. Both groups can be used separately.
TIMER
In timer mode, the receiver switches ON for 7 minutes after receiving a programmed
send code and OFF again after expiration of this time.
Keycode A: ON (for 7 minutes)
Keycode C: ON (for 7 minutes)
Keycode B: ON (for 7 minutes)
Keycode D: ON (for 7 minutes)
Each keycode can be programmed and used separately. There is no automatic as-
signment.
DEADMAN FUNCTION
In deadman function, the receiver switches for the duration of the transmitter operation.
Due to the maximum duty cycle, all transmitters automatically switch off after 36 sec-
onds. With the gateway, the system switches off after 31 seconds already.
Keycode A: ON
(max. 31 seconds)
Keycode B: ON
(max. 31 seconds)
Keycode C: ON
(max. 31 seconds)
Keycode D: ON
(max. 31 seconds)
Each keycode must be programmed and used separately. There is no automatic as-
signment. Simultaneous use of several channels is not possible.
UP/DOWN (2-button operation)
This operating mode is only available with receivers for shutter control featuring two
interlocked relay outputs. Here, UP stands for switching of the 1st relay, DOWN for
switching of the 2nd relay.
Parallel switching of both outputs is not possible. The relays automatically
cut off again after 90 seconds.
The STOP command is triggered by transmission of the counter-direction.
