RGK02
Operating Instructions
25
4.3.1
1-button operation
Data type
1 bit
Number of objects
4
(A) 1-button, (B) 1-button,
(C) 1-button, (D) 1-button
Object behaviour
at [0]
Sending of the respective keycode
at [1]
Sending of the respective keycode
Easywave operating
modes
Impulse, timer
ON/OFF (1-button operation)
In this operating mode, four 1 bit objects are created for the respective channel.
These represent the keycodes A, B, C and D of one Easywave serial number.
If an assigned KNX sensor is operated, the gateway sends the respective send code.
Here, the individual objects and/or keycodes do not depend on each other and can be
assigned to separate group addresses.
