RGK02
Operating Instructions
5
1
General
The Easywave KNX Gateway RGK02 (in the following called gateway) is a product of
the KNX system and meets the KNX guidelines.
Sufficient technical knowledge provided through KNX training courses is required for
comprehension. The functions of the device are software-dependent. For detailed in-
formation about the software that is currently available for download and the resulting
function scope, refer to the manufacturer's internet site.
Planning, installation and commissioning of the gateway takes place with a software
certified by KNX Association.
Fundamental knowledge of the Easywave radio system is required for optimum utilisa-
tion of the gateway. Chapter 2, "Information about the Easywave radio system" contains
important information to this respect.
1.1
Technical data
Coding
Not required, as the send code is programmed.
Up to 128 transmitters can be programmed.
Channels
128 input channels, 32 output channels;
Range
150 m at good free field conditions
Voltage supply
KNX bus voltage 29 V DC
(no extra bus coupler required)
Operation
Via KNX bus and Easywave products
Operating modes
Easywave receive:
toggle, switch, dim, shutter operation,
set value, send signal
Easywave send:
ON/OFF (1-button operation), ON/OFF (2-button opera-
tion), UP/STOP/DOWN (3-button operation), deadman
button
Protection type
IP21
Operating temperature
-20°C to +60
°
C
Dimensions
46 x 46 x 25 mm
Current consumption
ca. 35 mA
Frequency
868.30 MHz
