RGK02
Operating Instructions
27
4.3.3
3-button operation
Data type
1 bit
Number of objects
2
(A/C) 3-button and (B/C) 3-button
Object behaviour
at [0]
Sending of [C ]
at [1]
Sending of [A] or [B]
(depending on the object)
Easywave operating
modes
UP/STOP/DOWN
(3-button operation)
Two objects (A/C and B/C) are generated in this operating mode for the respective
channel.
These represent the keycodes A, B and C of one Easywave serial number.
If an assigned KNX sensor is operated, the gateway sends the respective send code.
If the KNX bus receives a [1], the keycode A or B is sent out depending on the selected
object. When receiving a [0], the keycode D is sent analogue.
