ELCOS DIP-804/00, Instruction And User'S Manual

Page: 8 / 12

8 GB DIP-804/00 /2
TYPE OF PROBLEM PROBABLE CAUSES REMEDIAL INTERVENTIONS
THE STARTER MOTOR
FUNCTIONS BUT THE
ENGINE DOES NOT
START - Lack of fuel
- Fuel supply circuit defect
- Low temperature
- Fill the tank
- Check that the stop system (solenoid or
electromagnet) functions
Consult the engine instruction manual
- Check that the preheating functions
- The belt breakage
indicator lights up after
the PROTECTIONS
ACTIVE indicator
lights up
- The low oil pressure
indicator lights up after
the PROTECTIONS
ACTIVE indicator
lights up
- The overheating
indicator lights up
ENGINE STOPS FOR
ANOMALY
ENGINE DOES NOT
STOP UNDER ANY
CONDITIONS - Stop system
(electromagnet or
solenoid) does not
function
- Defective engine
probes
- Defective device
- Check the condition of the alternator belt
- Check the engine oil level
- Check the engine cooling system
- Check the correct mechanical or electrical
functioning of the stop system. If the
problem persists, check the stop
servo-relay.
- Test the probes (see ENGINE PROBES
TEST on page 3) and if necessary replace
them.
- Check that during the stop phase there is
voltage on terminal (5) (see STOP on
page 3), simulate the function (see DEVICE
TEST on page 5 and if necessary replace
the device (*)
TROUBLE SHOOTING