ELCOS SRL
- Parma - CIM-137/4G - 137/4GW - MAN - EN
2
MOTOR PUMP OPERA-
TING SPEED IS DISPLA
-
YED.
PUMP WATER
PRESSURE
IS DISPLAYED
.
ENGINE WATER OR OIL
TEMPERATURE IS
DISPLAYED.
ENGINE OIL
PRESSURE
IS DISPLAYED.
THE CALL IS
PRESENT.
THE ENGINE
IS RUNNING.
PUMP PRIMING
(ALWAYS ON)
FAILURE TO
PRIME PUMP
FLASHING.
THE FUEL LEVEL
IS DISPLAYED.
THE VOLTMETER
OF THE BATTERY IS
DISPLAYED.
ACCUMULATED
OPERATION HOURS
ARE DISPLAYED.
PRESS TO ACCELERA
-
TE THE MOTOR PUMP
WHEN THE CONTROL
UNIT IS IN MANUAL
MODE.
PRESS TO DECELERA
-
TE THE MOTOR PUMP
WHEN THE CONTROL
UNIT IS IN MANUAL
MODE.
EMERGENCY STOP
PRESS TO ADJUST
ELECTRONIC PUMP
WATER PRESSURE
SWITCH.
THE BATTERY IS
NOT CHARGING.
LOW ENGINE
OIL PRESSURE
THE ENGINE PROTEC-
TION DEVICES ARE
ACTIVE. SWITCHED
ON 10 SEC. AFTER
DETECTION OF ENGINE
RUNNING
.
FIELD SIGNAL
STRENGTH
CAN BUS PARAME
-
TERS
SMS MESSAGE
BEING
RECEIVED OR SENT.
SYSTEM ERROR.
MISSING SIMCARD.
PROCEDURES FOR
DISABLING
THE PIN CODE, NOT
REGULAR.
PUMP PROTECTION
IS ACTIVE.
PRESS TO SELECT
THE DISPLAYED
FUNCTION, EACH
TIME IT IS PRESSED,
THE INSTRUMENT
INDICATED BY THE
DISPLAY CHANGES.
HOLD DOWN TO SI
-
LENCE THE GENERAL
ALARM (BUZZER).
PRESS UNTIL THE 2
SIGNS START
FLASHING
TO EXCLUDE PUMP
PROTECTION.
TO RE-ACTIVATE
PROTECTION, PRESS
AGAIN UNTIL THEY
SWITCH OFF.
PRESS TO START
THE MOTOR
PUMP WHEN THE
CONTROL UNIT
IS IN MANUAL
MODE.
PRESS BRIEFLY,
THE LED STAYS
OFF, THE MOTOR
PUMP STOPS IF
THE CALL OR THE
TIMER ARE NOT
ACTIVE.
PRESS UNTIL THE
LED FLASHES,
THE MOTOR PUMP
STOPS AND STAR
-
TING WITH THE
CALL AND THE TI
-
MER IS SWITCHED
OFF.
STOPPAGE DUE
TO LOW PRESSURE OR
PUMP WATER
OVERPRESSURE OR
ELECTRONIC
PRESSURE SWITCH
(TRANSMITTER) INTERRUPTED.
IN THIS CASE, THE ANOMALY IS
HIGHLIGHTED BY THE FLASHING
WARNING LIGHT.
OVERPRESS.
DISCONN’ED
LOW PRESS..
STOPPING DUE TO LOW
FUEL LEVEL
NORMAL WORKING
PRESSURE. SWITCHED
OFF WHEN THE PRES
-
SURE DIFFERS FROM
THE WORKING PRES
-
SURE BY THE ALLOWED
OSCILLATION.
UTILIZE IN
PROGRAMMING.
STOPPING DUE TO
INSUFFICIENT
ENGINE OIL PRESSURE
STOPPING DUE TO
LOW COOLANT LEVEL.
STOPPING DUE TO
LACK OF BATTERY
CHARGING (BELT BRE
-
AKAGE).
STOPPING DUE TO
HIGH ENGINE
TEMPERATURE.
PRESS IF YOU WANT
TO SET WORKING
TIME
(UP TO 96 HOURS).
After starting, the motor pump protects itself automatically.
PRESS TO SELECT
THE FUNCTION:
AUTOMATIC
OFF/RESET
MANUAL
CUMULATIVE ALARM
WITHOUT
STOP
WITH
STOP
BRIEF INSTRUCTIONS
CLOCK