ELCOS 00211143, Instruction And User'S Manual, Page: 18 / 20

ELCOS SRL
- Parma - CIM-137/4G - 137/4GW - MAN - EN
18
TACHOMETER ADJUSTMENT WITH CHARGING ALTERNATOR FREQUENCY W.
Press until
the LED
comes on.
(CALIBRATION
RPM)
EXIT FROM
PROGRAMMING MODE.
Press until
the LED
goes out.
LANGUAGE
TACHOMETER
SETTING
USER
PROGRAMMING
TIMER
TELEPH. GSM
BUTTON LOCK
_ _ _ _
RPM
3000
RPM
ADJUSTMENT
IN PROGRESS
OK
3000
RPM
CLOCK SETTING
TIMER Allows up to 10 starts/stops to be programmed over
a period of 24 hours. This programming stops the TIMER
function.
Programming of telephone numbers of the users to inform
when the generator set is in alarm see page14.
1 0 : 2 1
CLOCK
Decreases
Increases
LANGUAGE CHOICE . The language set up is ITALIAN; the languages that can be selected are: ENGLISH - FRENCH - GERMAN
- SPANISH - PORTUGUESE.
BUTTON LOCK . With the push-button panel locked, buttons remain active.
LANGUAGE
00:00
09:15
09:15
00:00
10:22
10:22
LOCKED BUTTON
RELEASED
START 1
:START 1
OK
STOP 1
OK
LOCKED
RELEASED
ENGLISH
Language choice:
Italian German
English Spanish
French Portuguese
Press to select the language.
Press to choice
Set hours and minutes
Decreases Increases
Set hours and minutes
Decreases Increases
Decreases Increases
Set the engine revolutions read
on the portable tachometer.
Press and wait for
OK to be written.
Press and wait for
OK to be written.
Press and wait for OK to be written.
After the first programming setting has
been finished the other 9 programming
settings can be repeated,
by pressing
.
Press and wait for
OK to be written.
Press and wait for
OK to be written.
Press to
display.
Press to
display.
Press to
select
START 1
2
-
-
-
10
To stop exit the
programming mode and
press stop
CLOCK allows up to 10 STARTS/STOPS to be programmed over a period of 24 hours. Carry out setting operations with the
engine stopped. The control unit accepts only complete programming settings: START 1 STOP 1
START 2 STOP 2 and so on
If a start is programmed, but a stop is not programmed,
ERROR
is written on the display. While running with the engine started by clock, indicator stays on.
During stopping by clock, indicator comes on and stays on until the next start.
_ _ _ _
Setting
set to zero.
USER PROGRAMMING
NECESSARY PROGRAMMING
When the white/red wire is connected.
Factory setting
RPM/W CALIBRATION PRESS START
Start the primed motor pump
with delivery
closed
with button .
TACHOMETER ADJUSTMENTS
Bring the engine to idle at constant known
speed for example via a portable tachometer.