ELCOS SRL
- Parma - CIM-137/4G - 137/4GW - MAN - EN
13
(MODEM INTEGRATED INTO CONTROL UNIT)
Functions and programming
•
Notifies via SMS message when the motor pump is in alarm condition.
•
Programming pages of telephone numbers to be dialled when the motor pump is in alarm condition.
•
Possibility of displaying the status of the motor pump.
•
Possibility of switching off the protection of the pump.
•
Setting of the minutes of work.
•
Possibility of starting or stopping with SMS commands.
To insert the SIM CARD and program
the telephone warning device
remove the cover
TO AVOID DAMAGING
THE CONTROL UNIT
PUT THE COVER BACK
ON CAREFULLY
TELEPHONE NUMBER
PROCEDURE FOR DISABLING THE PIN CODE
ACTIVATION
PRECAUTIONS
The telephone number is supplied by the provider once the contract has been signed. This is the number
you should dial from your cell phone when you want to interact with the modem of the control unit.
Once the SIM card has been purchased from a telephone provider on any contract, the PIN needs to be
disabled.
To do this, it is necessary to insert the SIM in a normal private-use cell phone, then enter the PIN supplied
by the provider. Browse through the cell phone menu to locate the procedure for disabling the PIN. Carry
out the disabling procedure and check that, on turning the phone on again, the PIN is not requested.
Turn off the phone and take out the SIM card. Ensure that the motor pump is not running, then insert the
SIM in the slot provided.
To ensure that the area around the unit is being reached by the field signal, check the graphical indicator
on the display
.
If necessary, position the unit’s internal antenna outside the unit, at the point where the signal is strongest.
The programmings, the controls and the display of motor pump status are active with the control unit in
automatic or manual mode.
-
Position the antenna vertically using its magnetic base.
-
Do not connect an extension cable to the antenna cable.
GSM TELEPHONE WARNING DEVICE AND COMMAND SYSTEM
Insert the SIM Card only when the two green LEDs present in the SIM compartment
are off.