V
V
I
I
P
P
C
C
L
L
A
A
M
M
P
P
M
M
I
I
N
N
I
I
Tipica frequency responce curve
-V f (f)
5. GUARANTEE
Our guarantee is applicable for twelve months after the date on which the equipment is made available (extract
from our General Conditions of Sale, available on request).
6. MAINTENANCE
For maintenance, use only specified spare parts. The manufacturer will not be held responsible for any accident occuring
following a repair done other than by its After Sales Service or approved repairers.
6.1 Changing the battery
The clamp must be disconnected from any external electrical source and must not be in contact with the cable.
- Set the switch to OFF
- Slide a screwdriver into the slot at the top of the battery cover (rear of the clamp) and push the battery cover upwards.
- Replace the used battery by a 9 V battery, type LF22; observe the polarities.
- Install the battery in its housing, then install the battery cover.
6.2 Storage
If the clamp is not used for a period of more than 60 days, remove the battery and store it separately.
6.3 Cleaning
- The clamp must be disconnected from any external electrical source and must not be holding the cable.
Clean the unit and jaws with a cloth slightly moistened with soapy water. Clean off with a damp cloth.
Then dry quickly with a cloth or pulsed air.
- Do not splash water onto the clamp.
- Keep the gap between the jaws in a state of perfect cleanliness.
Repair
For all repairs before or after expiry of warranty, please return the device to your distributor.
4.7 Marginal operating conditions
Clamped conductor temperature:
110°C
12
