26
en
CAL
(CALIBRATION)
MATERIAL
Select the material velocity from a chart of basic material
types when a known sample thickness, or material velocity
cannot be obtained.
ONE-POINT
Performs a single point calibration. This function allows you
to automatically calculate the velocity by entering a known
sample thickness.
TWO-POINT
Performs a two-point calibration. This function allows you to
automatically calculate the velocity by entering a second
known sample thickness.
UNITS
Toggle between Metric (millimetres) or English (inches)
units.
VELOCITY
This function calibrates your gauge by setting the velocity
to a known material velocity.
DISP
(DISPLAY)
VIEW
Choose between RF wave, RECT (rectified) wave, BSCAN
(cross section), and DIGITS (large digits) views.
DELAY
(B-START)
Adjust where the left side of the display window starts
according to thickness, in inches or millimetres.
RANGE
(B-DEPTH)
Set the overall depth of the viewable measurement area. It
functions a lot like a zoom on a camera.
CONTRAST
Adjusts the contrast of the display
BACKLIGHT
Select backlight option of OFF, ON or AUTO. In AUTO
mode the backlight is only switched on when the gauge is
making a measurement.
TUNE
POLARITY
The gauge operates on a zero crossing detection principle.
This feature toggles which stroke of the cycle the crossing
detection uses, either positive or negative.
GAIN
Increases or decreases the overall amplitude of the signal.
Gain is similar to the volume control on a stereo receiver.
AGC
When operating in E-E mode, the gauge adjusts the gain
automatically. Alternatively, the AGC can be manually
controlled.
GATE
GATE 1
Sets the start of the gate, according to time/distance.
GATE 2
Set the start position of gate 2 (E-E mode only)
MEASURE
MODE
Select the measurement mode.
SET UP
OPEN
Displays a list of factory and user-defined setups currently
stored in memory. These setups can be recalled and used
at any time.
SAVE
Save a custom setup that you have modified or created.
DEFAULT
SETUP
Loads a basic default setup. Use only as a last resort if the
setups in your gauge have been corrupted and a computer
is not accessible.
LANGUAGE
Select the menu language
Menu
Function
Description
