Elcometer 280 S, User Manual, Page: 8 / 112

1 Ensure that the Elcometer 280 is off.
2 Insert the signal return lead plug into
the socket.
3 Push the plug in and twist it ¼ turn to
the right.
4 Switch the gauge on.
5 Make sure the signal return lead is
uncoiled and extended. For the most
ideal conditions, attach the signal
return lead to an uncoated area of the
substrate, using part number
T28022750.
6 If ‘ ’ icon is displayed, the plug is not
connected correctly, repeat steps 1-5.
If problem persists, please contact your Elcometer distributor.
To remove the lead, push the plug in and twist it ¼ turn to the left.
7 CONNECTING THE SIGNAL RETURN LEAD
en
www.elcometer.com 7
R
8 GETTING STARTED
1 Press the ON/OFF button until the
Elcometer logo is displayed.
é
2 Select your language using the
ê
softkeys (Model T only) and press the
OK softkey.
If ‘ ’ icon is displayed, the return lead
plug may not be connected, see Section 7.
To access the language menu when in an
alternate language:
1
Switch the gauge OFF.
2 Press and hold the left softkey and
switch the gauge ON.
é
3 Select your language using the
ê
softkeys.
www.elcometer.com
1
2