I02-118 User manual & maintenance guide
Version 04
(translation of the original manual)
of TLM 1000
Page
16
sur 25
Close the press and let warm up for 35 minutes at 120°C (250°F).
Let the thermic press cool down for 30 minutes. Remove excess glue with some abrasive paper.
5.4
Changing the belt
–
Timing belt
The new timing belt is delivered already welded.
Unscrew the caps on each side of the transfer system and slide the new belt in place of the worn
one. (Respect the passage way between the pulleys and belt guide).
Covers to be removed
