SnowClear Installation, Operator & Maintenance Manual
9
Installation Guidelines
Installation Location
1.
An outdoor area free from obstructions.
2.
If installing under a roof or overhang, ensure there is 3m (10 feet) or more of clearance.
3.
Choose an area where there is vehicle height clearance if required.
4.
Chose an area where heavy snow or ice sliding off a roof, will not damage the product.
Step 1.
Mount the bracket to the ceiling/wall/pole at the designated height (see #11, under Installation
Instructions).
Step 2.
Install the unit to the bracket and set the angle between 0° and 20°.
Step 3.
Install the snow sensor and controller. Connect to the unit.
Step 4.
Connect the snow sensor and controller to the 208-240VAC power supply.
Installation Method
Three ways to install the SnowClear Overhead Melter to optimize the desired snow melting area.
Wall installation Ceiling installation Pole installation
