background image

 

SnowClear Installation, Operator & Maintenance Manual

 

21 

 

Replacement Parts 

Please contact Trecan Combustion Limited- Parts Sales Department by one of the following methods for 
replacement parts:

 

Mail:   

Trecan Combustion Limited 

 

 

 

4049 St. 

Margaret’s Bay Road

 

 

 

 

Hubley, Nova Scotia 

 

 

 

B3Z 1C2     Canada 

 

Phone:  (902) 876-0457   Press 3 for Parts Sales 

 

Email:   

[email protected]

 

 

1 Year Limited Warranty 

Terms and Conditions of the SnowClear Overhead Melter 1 Year Limited Warranty 

What is covered 

 

Your SnowClear Overhead Melter is warranted against original defects in material and workmanship 
for a period of 1 year from the date of purchase, when used for normal overhead melting purposes in 
accordance  with  the  SnowClear  Overhead  Melter  Installation,  Operator  &  Maintenance  Manual. 
Please retain your proof of purchase. This warranty provides, at no extra cost to you, all labour and 
parts necessary to ensure your overhead melter is in proper operating condition during the warranty 
period.  The  replacement  of  any  part  of  your  overhead  melter  under  warranty  will  not  extend  the 
period of the warranty. Any parts which are returned to Trecan Combustion Limited will become the 
property of Trecan Combustion Limited. 

 

This limited warranty is subject to the following terms: 

 

What is not covered 

Trecan Combustion Limited, shall not be liable for costs, damages or repairs incurred as a result of, due to, or 
from: 

 

Purchases of overhead melters from unauthorized dealers. 

 

Careless operation or handling, misuse, abuse and/or lack of maintenance or use not in accordance 
with the SnowClear Overhead Melter Installation, Operator & Maintenance Manual.  

 

Use of the overhead melter other than for normal overhead melting purposes within North America. 

 

Use  of  parts  not  in  accordance  with  the  SnowClear  Overhead  Melter  Installation,  Operator  & 
Maintenance Manual.  

 

Use  of  parts  and  accessories  other  than  those  produced  or  recommended  by  Trecan  Combustion 
Limited. 

 

External sources such as power surges, power spikes and undo vibrations. 

 

Repairs or alterations carried out by unauthorized/unlicensed parties or agents. 

 

Normal wear and tear. 

 

Additionally,  this  limited  warranty  does  not  apply  to  any  overhead  melter  that  has  had  the  serial 
number altered or removed. 

 

 

 

Summary of Contents for SnowClear TK-C4000























Reviews: