SnowClear Installation, Operator & Maintenance Manual
11
Mount bracket to wall/ceiling/pole
between 2.5-3m (8.2-10 feet) above the ground
The SnowClear Overhead Melter comes with a standard mounting bracket. This adjustable bracket allows a
direct ceiling, wall, or pole mount, and allows the angle of the unit to be adjusted. The bracket needs to be
installed onto a secure frame, wall, ceiling, or pole. When completing the installation, ensure all screws are
tight and that the unit is secure.
When installing the unit on a wood or thin wall or ceiling, reinforcing the
wall or ceiling with a steel plate is required to ensure that the weight of the unit is supported.
Wall Installation
Secure the bracket with four M12 anchor bolts into the wall, using the four outer screw holes.
Note: Anchor bolts are not included.
For wall installation, use the four holes indicated below.
Ceiling Installation
Secure the bracket with four M12 anchor bolts into the ceiling, using the four outer screw holes.
Note: Anchor bolts are not included.
For ceiling installation, use the four holes indicated below.
