background image

 

SnowClear Installation, Operator & Maintenance Manual

 

22 

 

 

Warranty Service 

 

Please fill out and return the Warranty Form, or take a photo of the completed Warranty Form and 
email the information to 

[email protected] 

 

 

Before  parts  service  can  take  place,  the  terms  of  the  warranty  require  that  you  contact  Trecan 
Combustion Limited with your model name/number, serial number, date and place of purchase. 

 

Please keep your purchase receipt in a safe place to ensure you have this information. 

 

All parts service work will be coordinated by Trecan Combustion Limited or its authorized agents. 

 

Any replaced defective parts will become the property of Trecan Combustion Limited. 

 

Service under this warranty will not extend the period of this warranty. 
 

Warranty Limitations and Exclusions 

 

Any  implied  warranties  relating  to  your  overhead  melter  including  but  not  limited  to  warranty  of 
merchantability  or  warranty  of  fitness  for  a  particular  purpose,  are  limited  to  the  duration  of  this 
warranty. This limitation is not allowed by some States, Provinces or Territories and so this limitation 
may not apply to you. 

 

Your remedy for breach of this warranty is limited to the warranty service described above. Trecan 
Combustion Limited will not be liable for any consequential damages or incidental damages you may 
incur in connection with your purchase and use of your overhead melter. This limitation is not allowed 
by some States, Provinces or Territories and so this limitation may not apply to you. 

 

The warranty gives you specific legal rights, and you may also have other rights which vary from state 
to state, province to province and territory to territory. 

 

This limited warranty is not transferable. 

 

This limited warranty is only available in North America. 

 

This product is made in Japan by: 
ELCOM Co.,Ltd. 
MC Bldg. 10-1 Kita 10 Nishi 1, Kita-ku, Sapporo City 001-0010, Japan 

 

Assembled in Canada by: 
Trecan Combustion Limited 

4049 St. Margaret’s Bay Road

 

Hubley, Nova Scotia 
B3Z 1C2     Canada 
 

Summary of Contents for SnowClear TK-C4000























Reviews: