ELCOM POS-3000, User Manual

Page: 29 / 68

POS–3000 © Elcom, s. r. o.
29
POS programming
• Total
– Sets the function text for total sale value.
• RA – Sets the function text for receive on account
operation.
• PO – Sets the function text for paid out operation.
After the programming is finished, check thoroughly the correctness of entered values. Ac-
cidental errors can still be corrected. The group dialogue is exited by pressing the
OK ( OK
Enter ).
Print group
This group contains the settings for the printer and printing.
Action description POS POS keyboard PC keyboard
log in (you have to be authorised to
enter programming mode)
press the Programming
button
until the
Programming icon is
selected, then press
until the
Programming icon is
selected, then press
press the Printing
and voice synthesis
button
until the
Printing icon is se-
lected, then press
until
the Printing icon is
selected, then press
Flag descriptions:
• Log on
– Logging on is compulsory after turning on or
unlocking if checked.
• Printing – This group sets the printing parameters.
Print receipt in training – Prints receipts in training mode if checked.
Print duplicate – Allows duplicate printing if checked.
Print text logo on journal – Prints text logo onto journal tape if checked.
Free lines between receipt – Use the pull-down menu to specify number of empty
lines before the cutter cuts the receipt roll.
Printing after the break – Determines restoration of printing (for instance if
the unit is turned off accidentally). Printing can be
restored with or without printed message.
Message after the break – The message that will be printed after printing
< Figure 3.5
Printing and voice synthe-
sis group dialogue