EL.CO. S.R.L. – ELK22MP
-
INSTRUCTIONS FOR USE
- Ver.05 - 03/22 - PAG. 13
10.5 - DEVICE CODING
ELK22MP-A-B-C
ELK22MPS-A-B-C
ELK22MPM-A-B-C
ELK22MPE-A-B-C
A : SUPPLY
24
= 24
≂
(
VAC/VDC)
240
= 100... 240
∿
(VAC)
B : OUTPUT OUT1
R
= Relay
C : OUTPUT OUT2
2R
= Relay
2S
= Voltage output for SSR
OUTPUT OUT3
For all models
MODBUS COMMUNICATION
Only for ELK22MPM
MODBUS TCP COMMUNICATION
Only for ELK22MPE
10.6 – ACCESSORIES (Not supplied)
ELK22DKP
= Keyboard
BC-8P
= Connection cable for ELK22MP
TC-8P
= Connector for RS485 line terminal resistor. This connector
has the termination resistor already integrated
11 - PROBLEMS, MAINTENANCE AND WARRANTY
11.1 - ERROR REPORTING
Error
Reason
Action
Fail
Auto
Autotuning
not
completed
within 12 hours
Check
connection
probe and actuator,
then restart autotuning
- - - -
Interruption of the probe
Check that the probe is
correctly connected to
the device, and then
verify that the probe is
working properly
11.2 - CLEANING
It is recommended to clean the device only with a slightly soaked
cloth of water or non-abrasive detergent and not containing
solvents.
11.3 - WARRANTY AND REPAIR
The device is guaranteed by manufacture defects or defects in
material found within 12 months from the date of delivery.
Warranty is limited to repair or replacement of the product.
Possible opening of the container, tampering with the device, or
improper use and installation of the product will automatically result
in the warranty being decayed.
In case of defective product during warranty period or out of
warranty period, contact the EL.CO. sales office. To get permission
to ship.
The defective product, therefore, accompanied by the indications of
the defect found, must be delivered by freight forwarding at the
EL.CO. factory, unless otherwise agreed.
