EL.CO. S.R.L. – ELK22MP
-
INSTRUCTIONS FOR USE
- Ver.05 - 03/22 - PAG. 12
ON,
Link/Act
ive,
OUT2
Device on
with
ethernet
communica
tion
and
output
2
connected
E
A
E
A
E = Cable
connected
B =
Comunicatio
n active
ON,
Link/Act
ive,
OUT3
Device on
with
ethernet
communica
tion
and
output
3
connected
E
A
A
E
E = Cable
connected
B =
Comunicatio
n active
ON,
Link/Act
ive,
OUT1,
OUT2
Device on
with
ethernet
communica
tion
and
output
1
and
2
connected
E
E
E
A
E = Cable
connected
B =
Comunicatio
n active
ON,
Link/Act
ive,
OUT1,
OUT3
Device on
with
ethernet
communica
tion
and
output
1
and
3
connected
E
E
A
E
E = Cable
connected
B =
Comunicatio
n active
ON,
Link/Act
ive,
OUT2,
OUT3
Device on
with
ethernet
communica
tion
and
output
2
and
3
connected
E
A
E
E
E = Cable
connected
B =
Comunicatio
n active
ON,
Link/Act
ive,
OUT1,
OUT2,
OUT3
Device on
with
ethernet
communica
tion
and
output 1,2
and
3
connected
E
E
E
E
E = Cable
connected
B =
Comunicatio
n active
OBLEMS, MAINTENANCE AND WARRANTY
10 – TECHNICAL DATA
10.1 - ELECTRICAL CHARACTERISTICS
Power supply: 24V
≂
, 100…240V
∿
+/- 10%
AC frequency: 50/60 Hz
Absorption: Approx. 4 VA
Input/s: 1 input for temperature probes: tc J, K, S ; RTD Pt 100 IEC;
PTC KTY 81-121 (990 W @ 25 °C); NTC 103AT-2 (10KW @ 25
°C); 0-10V; 4-20mA.
Output/s: Up to 3 outputs. 2x Relay SPDT (6A-AC1, 3A-AC3 250
V
∿
, 1/2HP 250 V
∿
, 1/3HP 125V
∿
) or voltage output for piloting
SSR (25mA/ 16V ), 1x voltage output for piloting SSR (25mA/
16V ).
Auxiliary power output: 15 V not stab. / 20 mA Max
Electrical relay output life: 100000 operat.
Overtension category: II
Measurement category: I
Protection class against electric shock: Class II front
Isolation:
Reinforced between low voltage parts (“24” and “240”
power supply and relay outputs) and front; reinforced between low
voltage parts (“24” and “240” power supply and relay outputs) and
low voltage parts (static inputs and outputs); reinforced between
power supply and relay outputs; reinforced between low voltage
parts (“24” and “240” power supply and relay outputs) and ethernet
port.
No insulation between the input and the static outputs.
10.2 - MECHANICAL CHARACTERISTICS
Container: Self-extinguishing plastic UL 94 V0
Dimensions: 50 x 50 mm, depth 118 mm
Weight ELK22MP: approx.. 150 g
Weight ELK22DKP: approx.. 60 g
Installation ELK22DKP: Panel mounting in 49,5 x 49,5 mm hole or
22 mm diameter hole
Installation ELK22MS: Omega DIN guide
Connections: 2,5 mm
2
screw terminal block
Front protection degree: IP 65 (ELK22DKP with gasket)
Pollution degree: 2
Ambience of usage: internal
Working ambient temperature: 0 ... 50 °C
Working ambient humidity: 30 ... 95 RH% with no condensation
Temperature for the transportation and storage -10 ... 60 °C
10.3 - OPERATING CHARACTERISTICS
Adjustment: ON/OFF, neutral zone ON/OFF, single action PID.
Measurement range: According to the probe used (see table)
Display resolution: According to the probe used. 1/0.1.
Total accuracy: +/- (0,5 % fs + 1 digit) ; tc S: +/- (1 % fs + 1 digit)
Measurement sampling time: 170 ms
Maximum cold joint compensation error (in tc): 0.1°C/°C at room
temperature 0 ... 50°C after a warm-up time of 20 min.
Display: 4 red digits h 12 mm, 4 green digits h 7 mm
Conformity: Directive EEC EMC 89/336 (EN 61326), Directive EEC
BT 73/23 and 93/68 (EN 61010-1).
10.4 - MEASUREMENT RANGE TABLE
INPUT
“dP” = 0
“dP”= 1
tc J
“SEnS” = J
-50 ... 1000 °C
-58 ... 1832 °F
- - - -
tc K
“SEnS” = CrAl
-50 ... 1000 °C
-58 ... 1832 °F
- - - -
tc S
“SEnS” = PtRh10%
- Pt
0... 1000 °C
32 ... 1832 °F
- - - -
Pt100 (IEC)
“SEnS” = Pt1
-100 ... 400 °C
-148 ... 752 °F
-100.0 ... 400.0 °C
-148.0 ... 752.0 °F
PTC (KTY81-121)
“SEnS” = Ptc
-50 ... 150 °C
-58 ... 302 °F
NTC (103-AT2)
“SEnS” = ntc
-30 ... 110 °C
-22 ... 230 °F
0-10V
“SEnS” = 0-10
-1000 … 1000
-100.0 … 100.0
4-20mA
“SEnS” = 4-20
-1000 … 1000
-100.0 … 100.0
