3
Safety regulations
General regulations
Intended use
Standards and regulations
General regulations
This document contains important
information with regard to safety and
reliability of the installation, its com-
missioning and the operation of the
THISION S PLUS boiler. All described
activities must be carried out exclusive-
ly by authorized technicians.
Only OEM parts of the boiler manufac-
turer may be used; in contrary cases,
our warranty and guarantee provisions
are excluded.
Intended use
The THISION S PLUS is a condensing
and modulating gas boiler, which is
suspended from walls and is delivered
with a pre-mix burner, either with or
without integrated warm water heating.
The maximum target temperature of
the boiler is 85°C.
Standards and regulations
All applicable standards (both
European and national) must be
observed during the installation and
operation of the THISION S PLUS
boiler, including:
- Local building regulations, with
regard to the installation of heating
facilities and waste gas exhaust
systems;
- Regulations about a connection to
the electrical utility network (mains);
- Regulations of the local gas utility;
- Standards and regulations
concerning safety facilities for
heating systems;
- Additional local laws/regulations,
which are applicable to the
installation and operation of heating
systems.
- See the chapter “Commissioning”,
for those regulations applicable
to heating water and warm water
quality.
The THISION S PLUS boiler is
CE-certified and conforms to the
following European directives and
standards:
- 92 / 42 / EEC (Efficiency of hot
water heating systems)
- 2009 / 142 / EEC (Gas consuming
facilities)
- 2006 / 95 / EEC (Safety of electrical
operating resources)
- 2004 / 108 / EEC (EMC
compatibility)
- EN 483 (Requirements for gas-fired
systems up to 70 kW)
- EN 15420 (Requirements for gas-
fired systems – type C boiler 70 kW
– 1000 kW)
- EN 15417 (Special requirements for
condensing gas-fired boilers 70 kW
– 1000 kW)
- EN 50165
Electrical equipment for non-electric
appliances, intended for household
use and similar purposes - safety
requirements
- EN 15502-1 (Requirements for
gas-fired systems – Part 1: General
requirements and tests)
- EN 55014-1 (2000) EMC –
Requirements for household
appliances, electrical tools and
similar equipment – Part 1:
Emissions
- EN 55014-2 (1997) EMC –
Requirements for household
appliances, electrical tools and
similar equipment – Part 2: Safety -
product family standard
- EN 61000-3-2 (2000)
Electromagnetic compatibility
(EMC) - Part 3-2: Framework
conditions - framework conditions
for current fluctuations (current
drain 16 A per phase)
- EN 61000-3-3 (2001)
Electromagnetic compatibility
(EMC) - Part 3-3: Framework
conditions for voltage fluctuations,
voltage loss and flicker in public
low-voltage networks, for equipment
with a nominal 16 A current per
phase, which are not subject to any
special connection regulations.
- EN 60335-1 (2002) Household
and similar electrical equipment
- Safety - Part 1: General
requirements
- EN 60335-2-102 (2006) Household
and similar electrical equipment
- Safety - Part 1: Special
requirements for gas, oil and solid
fuel-fired equipment with electrical
connections
In addition to this, the following
national standards must be
observed:
UK:
- Gas Safety Installation & Use
Regulations
- BS 5440-1:2008
- BS 5440-2:2009
- BS 6798:2014
The facility may only be operated by
authorized persons, who have been
trained with regard to the functions
and the use of the system. Inexpert
use can damage the equipment or
the connected system.
The equipment may not be used
by children, by persons with a
hindrance of bodily, mental or
sensory capacities, or which
insufficient experience and know-
how, unless they are supervised
or have received corresponding
instructions.
It must be ensured that children
cannot play with the equipment.
