ELCART
ELCART DISTRIBUTION SPA via Michelangelo Buonarroti, 46 - 20093 Cologno Monzese (Milano) ITALY
Tel. +39 02.25117310 Fax +39 02.25117610 sito internet: www.elcart.com e-mail: [email protected]
Manuale di istruzioni/Scheda tecnica
La divulgazione dei dati contenuti in questa scheda è da ritenersi un servizio puramente informativo e non costituisce alcun vincolo da parte della Elcart in merito a prestazioni ed utilizzo del prodotto.
The divulgation of data contained on this technical sheet are exclusively for informational reasons and establish no link on behalf of Elcart regard to thr performances and the usa of the product.
La divulgacion de los datos contenidos en esta ficha son un servicio unicamente informativo y no constituyen ningun vinculo de parte de Elcart respecto a las prestaciones y uso del producto.
ART. 28/2251
PAGINA 31 DI 36
Function button
(Check italian manual)
Group A is not started:
Press and hold for 1 second (less than 2 seconds): Interface functions menu appears.
A Group started:
Press and hold for 1 second (less than 2 seconds): prejudice to the confirmation and
select functions.
5.1.2 Description of the LEDs on the display.
(Check italian manual)
RED LED Alarm On: UPS output block and not present.
Example: Overloading beyond limits, Inverter Fault, Fault Booster, temperature etc..
LED YELLOW By-Pass On: UPS alarm.
Example: load supplied by the network etc..
YELLOW LED Battery On: UPS alarm.
Example: Operating power failure etc. Batteries.
GREEN LED Inverter On: UPS in normal operation or operation of ECO or batteries.
After starting the UPS, the 4 LEDs light up and then flash one by one.
Continue to flash until full start-up of the UPS.
5.1.3 Functions of the LCD Display
(Check italian manual)
When the UPS is mounted vertically, the LCD display appears as in fig.A.
Press ROTATE button for more than 1 second, the display will rotate and will appear
as in fig.B.
The LCD display has a section number, a graphic sections of batteries and loads.
A graphics section of fan operation and a graphics section of charger.
Section number shows the output values, load, temperature, input and battery.
Section Graphics shows the battery capacity and load. Each bar is turned on 20% of
the total. When the UPS is overloaded, the loading icon will flash while the battery is
discharged or disconnected, the corresponding icon will flash.
