__________________________________________________________________________________
ELC dmXLAN node3 User Manual
Set ID
If the node3 is being controlled by the dmXLAN software, an ID can be assigned to the
unit. The ID can be useful for preprogramming of the network.
Use the encoder in “Select” and “Edit” mode to change the 3 digits of the ID. The
digits are in hexadecimal format (16 possibilities 0-9, A-F). This means you can have
up to 4095 different ID’s in the system (ID 000 means that the ID is not used ---).
Network options
Use the “Select” and “Edit” modes to change the values of the IP address and the
netmask. For normal Art-Net operation, the netmask should be set to 255.0.0.0 and
the IP address should be between 2.0.0.1 and 2.254.254.254.
node3 Truss Mount
Power:
100-240 VAC 47-440 Hz 10VA max
Dimensions:
200 x 160 x 45 mm
Weight:
1.2 kg
node3 Surface Mount
Power:
Power over Ethernet required on the internal connection
Dimensions:
140 x 85 x 50 mm
Weight:
0.6 kg
node3 Wall Mount
Power:
Power over Ethernet required on the internal connection
Dimensions:
165 x 115 x 40 mm
Weight:
0.3 kg
node3 DIN
Dimensions:
105 x 90 x 60 mm
Weight:
0.2 kg
Technical specifications
Summary of Contents for dmXLAN node3
Page 1: ...dmXLAN node3 User Manual ...
