ELC dmXLAN node3, User Manual

Page: 4 / 11

__________________________________________________________________________________
ELC dmXLAN node3 User Manual
Truss Mount (DLN3T / DLN3T_FI)
The Truss Mount version of the node3 has a built-in power supply and is equipped
with 3 DMX ports and 2 Ethernet ports (both with Neutrik Ethercon) located on the
back of the device. The DMX ports are bi-directional so they can function as input or
output. The unit has an M10 nut on the bottom and a safety eye. The DLN3T is also
available in a fully isolated version (DLN3T_FI). All node3 Truss Mount versions can be
mounted in a 19” rack using the ELC Rack Mount Kit (ELC-RMKIT).
Truss Mount Power over Ethernet (DLN3TPOE / DLN3TPOE_FI)
The Truss Mount Power over Ethernet version of the node3 has specifications
identical to the regular node3 Truss Mount, except for the power supply. This version
is powered by PoE instead of a built-in power supply. The PoE version of the node3
Truss Mount is also available in a fully isolated version (DLN3TPOE_FI).
Surface Mount (DLN3S / DLN3S_FI)
The Surface Mount version of the node3 can be mounted onto a wall.
The Surface Mount unit has 3 bi-directional DMX ports located on the front of the
device. The DMX ports can be ordered in male or female version (any combination is
possible), as well as a version with fully isolated DMX ports (DLN3T_FI). There is also
one Ethernet connection (Neutrik Ethercon) on the front of the node3 SM. Another –
internal – Ethernet connection (RJ45) is located on the back of the device. This is the
main Ethernet input and requires a PoE switch as its power supply. To gain access to
the internal Ethernet connection, a technician must open the housing of the node3
by removing the four screws located along the sides of the front panel.
Wall Mount (DLN3W / DLN3W_FI)
The Wall Mount version features the same hardware and specifications as the
Surface Mount version, but the housing is designed for recessed wall mounting.
DIN Version (DLN3DIN / DLN3DIN_FI)
This DIN-rail mounted Power over Ethernet version connects 3 bi-directional DMX
ports to an Ethernet network, and an internal switch provides a second Ethernet port
for a local lighting desk or a PC running ELC dmXLAN control/management freeware
or additional Ethernet switches or nodes.
The DIN version of the node3 is also available in a fully isolated version (DLN3DIN_FI).
Versions