EN
RUBENS Bedside cabinets
Elbur sp. z o.o. sp.k.
11 z 44
6.0. Assembly
Before commencing assembly of the nursing bed, please read carefully
instruction manual and verify the shipment contents with your order (chapter
3.0). Please contact your distributor or
Elbur sp. z o.o. sp.k.
customer
service, if you miss any items or get something in bad condition.
Warnings
In order to avoid wrong assembly, read carefully instruction manual
and pay attention to labelling on the bedside cabinet. Remember also
to use proper tools.
6.1. Location requirements
•
there must be enough space available for adjusting the bedside cabinet
tray, its position and height,
•
RUBENS bedside cabinets can be located on both sides of the nursing
bed, due to its construction, without loss of functionality.
6.2. Castors assembly
•
carefully lay the bedside cabinet down on its side
(where is not bedside table tray),
•
fix castors from the bottom
–
use 4 screws for
each castor,
•
two castors have locking functions
–
they should
be fixed diagonally,
•
after fixing all castors, bedside cabinet can stand
on them, two castors should be locked now.
Note
There should be access to castors at all the time. They have to be placed
along the bedside cabinet before locking them.
For the purpose of activating (1) the brake push the foot lever down as far
as it goes.
For the purpose of deactivating (2) the brake push the foot lever toward
as far as it goes.
