23
Fig. 6.4
ASSEMBLY AND DISMANTLING OF
THE SIDE RUNNER FRAMES
•
Fit the side runner frames into the
holes on the side walls inside the oven
(fig. 6.4).
•
Slide in, on the guides, the shelf and
the tray etc. fig. 6.5.
The rack must be fitted so that the
safety catch, which stops it sliding out,
faces the inside of the oven.
•
To dismantle, operate in reverse order.
OVEN DOOR
The internal glass panel can be easily
removed for cleaning by unscrewing the 2
retaining screws (fig. 6.6).
DRAWER (SOME MODELS ONLY)
The drawer (fig. 6.7) comes out like a
normal drawer.
Do not store flammable material in the
oven or in the drawer.
Fig. 6.6
Fig. 6.7
INSIDE OF OVEN
The oven should always be cleaned after
use when it has cooled down.
The cavity should be cleaned using a mild
detergent solution and warm water.
Suitable proprietary chemical cleaners
may be used after first consulting with
the manufacturers recommendations and
testing a small sample of the oven cavity.
Abrasive cleaning agents or scouring pads/
cloths should not be used on the cavity
surface.
NOTE:
The manufacturers of this appliance
will accept no responsibility for damage
caused by chemical or abrasive cleaning.
Let the oven cool down and pay special
attention no to touch the hot heating
elements inside the oven cavity.
Do not store flammable material in the
oven
SOME MODELS ONLY
Fig. 6.5
Summary of Contents for S 61 X 631 F
Page 2: ...2...
