The cooker is supplied with an anti-tilting chain to prevent the appliance from
tilting forward and accidental damage to the gas pipe. Take the expansion with
hook and make an adequate hole in the wall behind, at the same height as the
chain fixing area. Insert the plug into the hole and then screw in the hook until it is
firmly fixed to the wall. Fix the chain to the hook. Adjust to level of the cooker
inserting the feet provided.
ELECTRICAL CONNECTION
The appliance is fitted with an approved 15 Amp flexible cord which must be
connected to a correctly earthed socket outlet. The manufacturer is not liable for
any direct or indirect damage caused by faulty installation or connection. It is
therefore necessary that all installation and connection operations are carried out
by qualified personnel complying with the local and general regulations in force.
The wire section on the cable must not be less than 1.5mm (3×1.5cable).
CONNECTION OF THE FEEDING CABLE TO THE MAINS
Connect the feeding cable to a plug suitable for the load indicated on the rating
plate of the product. In case of a direct connection to the mains (cable without plug),
it is necessary to insert a suitable omnipolar switch before the appliance, with
minimum opening between contacts of 3 mm (the grounding wire should not be
interrupted by the switch).
