DESCRIPTIONS OF SYMBOLS
IGNITION AND OPERATION OF THE BURNERS
In order to ignite a burner, it is necessary to depress the knob while rotating it anti-
clockwise, until the index is aligned with the position corresponding to the
maximum gas delivery (i.e. the large flame symbol).
As far as the models equipped with a safety valve are concerned, once the flame is
lit hold the knob depressed for about 3-4 seconds till the device keeps the burner
automatically lit. If the burner fails to ignite, wait one minute for the gas to dissipate
before attempting to reignite. At this moment it is possible to adjust the flame
intensity by rotating the knob anticlockwise from maximum position to the minimum
one (i.e. the small flame symbol).
In order to turn the burner off, rotate the knob clockwise bringing the index back to
the position corresponding to the closure symbol (
●).
IN CASE THE APPLIANCE FAILS TO OPERATE CORRECTLY, CONTACT THE
AUTHORISED SERVICE CENTRE.
