
40
3. Replace the inner pane:
•
Check that the four rubber pads are in
place (“
D
” in fig. 2.38).
IMPORTANT:
It is advisable, while
refitting the glass, to keep pressed in
position the four rubber pads “
D
”, by a
finger, to avoid breakage or slippage of
the rubber pads themselves (fig. 2.39).
•
Check that you are holding the pane
the correct way. You should be able to
read the wording on it as it faces you.
•
Insert the pane in the left “
E
” and right
“
F
”
slide guides (fig. 2.39), and gently
slide it to the retainers “
H
”
(fig. 2.40).
•
Reassemble the seal “
G
” in the correct
way (fig. 2.41) by hooking the no. 3
fixing hooks in the proper holes (fig.
2.42).
4. Unlock the oven door by opening it
completely and closing the lever “
A
”
on the left and right hinges (fig. 2.43).
D
G
Fig. 2.42
Fig. 2.38
Fig. 2.41
H
Fig. 2.40
A
Fig. 2.43
It is normal the opened gap between
the top edge of the inner glass and the
sealed gasket. This allows the cooling air
circulation.
The oven door
has a sealed
gasket in the top
part.
F
E
Fig. 2.39