
31
REPLACING THE OVEN LAMP/S (MODELS WITH INCANDESCENT LAMP/S)
WARNING: Ensure the appliance is switched off before replacing the lamp to avoid
the possibility of electric shock.
•
Let the oven cavity and the heating elements to cool down.
•
Switch off the electrical supply.
TOP RIGHT LAMP:
•
Remove the protective cover “
C
” (fig. 2.10a).
•
Unscrew and replace the bulb “
B
” with a new one suitable for high temperatures
(300°C) having the following specifications: 220-240V, 50/60Hz, E14 and same power
(check watt power as stamped in the bulb itself) of the replaced bulb.
•
Refit the protective cover.
LEFT LAMP (SOME MODELS ONLY):
•
Remove the left wire rack (and the side catalytic panel for the models with side catalytic
panels) by unscrewing the fixing screws.
•
Press down from the top the protective cover “
A
” (fig. 2.10a) and remove it by rotating
on the lower side.
IMPORTANT:
never use screwdrivers or other utensils to remove the cover “
A
”. This
could damage the enamel of the oven or the lampholder.
Operate only by hands.
•
Unscrew and replace the bulb “
B
” with a new one suitable for high temperatures
(300°C) having the following specifications: 220-240V, 50/60Hz, E14 and same power
(check watt power as stamped in the bulb itself) of the replaced bulb.
•
Refit the protective cover “
A
” operating in reverse order.
ATTENTION:
the notch in the inner edge of the cover must be oriented toward the
lamp.
•
Assemble the left wire rack (and the side catalytic panel with the arrow up for the
models with side catalytic panels).
Note: Oven bulb replacement is not covered by your guarantee.
A
A
A
B
B C
1
2
Fig. 2.10a