
36
D
G
Fig. 2.25
Fig. 2.21
Fig. 2.24
H
Fig. 2.23
REASSEMBLING THE INNER PANE:
1. Make sure the door is locked open
(see fig. 2.18).
2. Replace the inner pane:
•
Check that the four rubber pads are in
place (“
D
” in fig. 2.21).
IMPORTANT:
It is advisable, while
refitting the glass, to keep pressed in
position the four rubber pads “
D
”, by a
finger, to avoid breakage or slippage of
the rubber pads themselves (fig. 2.22).
•
Check that you are holding the pane
the correct way. You should be able to
read the wording on it as it faces you.
•
Insert the inner pane in the left “
E
” and
right “
F
” side guides (fig. 2.22) and
gently let it slide up to the retainers
“
H
” (fig. 2.23).
•
Reassemble the seal “
G
” in the
correct way (fig. 2.24) by hooking
the no. 3 fixing hooks in the proper
holes (fig. 2.25).
•
Open completely the oven door and
close the lever “
A
” on the left and
right hinges (fig. 2.26).
A
Fig. 2.26
It is normal the opened gap between
the top edge of the inner glass and the
sealed gasket. This allows the cooling air
circulation.
The oven door
has a sealed
gasket in the top
part.
F
E
Fig. 2.22