Elba EGC 833 series, Instructions For The Use, Page: 15 / 32

15
GLASS LID (only for models with
glass lid)
For cleaning purposes, the lid can be ea-
sily removed upwards once taken to the
upright position.
Should the hinges slip off, replace them in
their housing being careful that:
• The right housing must receive the
hinge marked “ D ” while the left hou-
sing must receive the hinge marked
“ S ” (Fig. 5.7)
REGULATING OF THE BALANCE
Lower the lid and check the correct balance.
While opened at 45° it should hang up.
If necessary, register the calibration of the
hinge springs using the screws “ R ” (fig.
5.7).
Do not shut lid when
burner alight.
ATTENTION
Do not lower the glass lid when the
gas burners are still hot or when
the oven is working or still hot.
Do not lay on the glass lid hot pans
and heavy kitchen utensils.
Dry off any liquid whitch may have
spilt on the cover before opening it.
Models with glass lid
S
D
R
Fig. 5.7
SOME MODELS ONLY