background image

 
 
 

ELAR DW BRICK ™

 

 

©Elation Professional, Los Angeles Ca. 

 

www.ElationLighting.com

   

rain or moisture.   

 

Caution!  There are no user serviceable parts inside this unit. Do not attempt any repairs 

yourself. Doing so will void your manufactures warranty.   

 

Please do not discard the shipping carton in the trash. Please recycle whenever possible. 

 

WARRANTY REGISTRATION:  The ELAR DW BRICK™ carries a two year (730 days) 

limited warranty. Please fill out the enclosed warranty card to validate your purchase. All 

returned service items whether under warranty or not, must be freight pre-paid and 

accompany a return authorization (R.A.) number. The R.A. number must be clearly written 

on the outside of the return package. A brief description of the problem as well as the R.A. 

number must also be written down on a piece of paper and included in the shipping 

container. If the unit is under warranty, you must provide a copy of your proof of purchase 

invoice. Items returned without a R.A. number clearly marked on the outside of the package 

will be refused and returned at customer’s expense. You may obtain a R.A. number by 

contacting customer support at (323) 582-3322.   

Summary of Contents for ELAR DW BRICK





































Reviews: