background image

 
 
 

ELAR DW BRICK ™

 

 

©Elation Professional, Los Angeles Ca. 

 

www.ElationLighting.com

   

1. GENERAL INFORMATION 

 

INTRODUCTIONCongratulations, you have just purchased one of the most innovative and 

reliable LED fixtures on the market today! The ELAR DW BRICK™ has been designed to 

perform reliably for years when the guidelines in this booklet are followed. Please read and 

understand the instructions in this manual carefully and thoroughly before attempting to 

operate this unit. These instructions contain important information regarding safety during 

use and maintenance.   

 

UNPACKING: Thank you for purchasing the ELAR DW BRICK™ by Elation Professional®. 

Every ELAR DW BRICK™ has been thoroughly tested and has been shipped in perfect 

operating condition. Carefully check the shipping carton for damage that may have occurred 

during shipping. If the carton appears to be damaged, carefully inspect your fixture for 

damage and be sure all accessories necessary to operate the fixture have arrived intact. In 

the event damage has been found or parts are missing, please contact our customer support 

team for further instructions. Please do not return this unit to your dealer without first 

contacting customer support at the number listed below. 

 

Inside the box you should find: the fixture,

 

Two DMX XLR waterproof connection cables, 

One waterproof power cables, a safety cable, and this manual. Please contact customer 

support at the number listed below if any of the above items are missing.

 

 

CUSTOMER SUPPORT: Elation Professional

®

 provides a customer support line, to provide 

set up help and to answer any question should you encounter problems during your set up 

or initial operation. You may also visit us on the web at www.elationlighting.com for any 

comments or suggestions. For service related issue please contact Elation Professional

®

Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m. Pacific Standard Time. 

 Voice: 

 (323) 

582-3322 

 Fax:  

 

(323) 

582-3108 

 E-mail: 

 [email protected] 

 Forum: 

 www.ElationLighting.com/forum 

 

WarningTo prevent or reduce the risk of electrical shock or fire, do not expose this unit to 

Summary of Contents for ELAR DW BRICK





































Reviews: