Time-code
The Art SSC can receive a time-code signal to trigger Actions, synchronise the Recorder or to
convert to other time-code protocols. It supports SMPTE, MTC, OSC and Art-net time-code
signals, however, only one protocol can be selected at a time. It is also possible to select 'Internal'
as the time-code source; in this case the internal timing logic of the Art SSC is used. Please see
the following diagram.
By enabling the time-code outputs for MTC, OSC or Art-Net you create a time-code converter, or
when 'Internal' is selected as input source, a time-code master.
OSC
Select the UDP port number on which to receive the OSC messages. Also, set here the IP address
and port number for the outgoing OSC messages.
26