Actions
Programming the show controller involves adding action-list and specifies actions.
Action-lists
In the Action-lists table you can include the sources you will be using in your project. You can
choose from input sources like: DMX, Art-Net, MIDI, GPI, Time-code, Scheduler & OSC. Each
source may exist in the table only once. Each Action-list can be enabled and disabled.
Actions
Within each Action-list you can create multiple Actions. You can create up to 64 Actions system-
wide and maximum 48 per list. For each Action you specify when it will be triggered and which
Tasks it will perform when that trigger occurs.
To change the details of an action, select it and press the EDIT button. This will open the Action
page.
Specifier
For most types of actions you can set the specifier. For example when editing a GPI action, it will
be triggered only on closing the contact (also known as 'normally open') when the specifier is set to
DOWN. When set to UP, the action will be only trigger on opening the contact (a.k.a. 'normally
closed'). Finally, when the specifier is set to CHANGE, the action will be triggered on both closing
and opening of the contact.
20