background image

4

2. Designated use

This device was developed for professional use 
on stages, in discos, theatres etc

. The device is 

only approved for a connection up to 230V 50/60 Hz 
AC voltage and only for indoor use.

Regular breaks during operation increase the 
lifetime of your device.

Avoid convulsions or any form of forceful im-
pact during the installation or the start-up of the 
device.

Make sure that the device is not exposed exces-
sive heat, humidity or dust at the place of insta-
llation

. Make sure that no cables are lying around. 

You could endanger your own safety and also the 
safety of a third party.

It is not allowed to operate or store the device 
in an environment in which spray water, rain, 
humidity or fog is expected. 

Humidity or very high 

atmospheric humidity could reduce the isolation of 
the device and could cause deathly electric shocks. 
If you use fog devices the device has not be expo-
sed to a direct smoke jet. There has to be a safety 
distance of at least 0,5m between this device and 
the fog machine. Make sure that the saturation of the 
fog has to enable a visibility of at least 10m.

Fire hazard!!

Make sure when installing the projector, that there 
are no flammable materials within a distance of at 
least 1m.

Do not operate the device during thunderstorms.

 

Surge voltages could destroy the device. Unplug the 
power supply during thunderstorms.

Surrounding objects or surfaces should not be 
in contact with the device.

Make sure that during the installation and re-
moval of the device the area below the place of 
installation is basically cordoned off.

 This also 

applies to implementation of service.

The device has been protected by a suitable 
safety.

Make yourself familiar with the functions of the 
device before start-up. 

People without the expe-

rience should not handle with the device. The most 
cause of functional disorder is inappropriate hand-
ling.

Do not use chemicals or volatile liquids for clea-
ning. 

Use a clean dry cloth to wipe off the dust, or a 

wet soft cloth for stubborn dirt.

For transport use the original packing or desig-
nated accessory to avoid damages during the 
transport.

For safety reasons unauthorized changes are 
forbidden.

A usage of the device which differs from usages 
which are described in this manual can cause
damages of the device.

 In that case the warranty 

expires. Additional you should notice that every di-
ffered usage is related with dangers and can cause 
e.g. an electrical short, fire, electric shock or crash.

Summary of Contents for PAR 64 LONG









Reviews: