18
19
CONDITIONS OF USE
Failure to comply with any warnings, instructions, procedures or any other common sense procedures
may result in injury, equipment damage, property damage or poor performance of the equipment.
Elaflex Hiby accepts no liability for direct, indirect, incidental, special, or consequential damages
resulting from failure to follow any warnings, instructions and procedures in this manual, or any other
common sense procedures generally applicable to equipment of this type. The foregoing limitation
extends to damages to person or property caused by the unit or damages resulting from the inability
to use the unit including loss of profits, loss of products, loss of power supply, the cost of arranging
an alternative power supply, and loss of time, whether incurred by the user or their employees, the
installer, the commissioner, a service technician, or any third party.
The manufacturer reserves the right to change the specifications of its products or the information in
this manual without necessarily notifying its users.
Variations in installation and operating conditions may affect the unit‘s performance. Elaflex Hiby has
no control over each installation‘s unique operating environment. Hence, no representations or war-
ranties concerning the performance of the unit under the actual operating conditions prevailing at the
installation are made. A technical expert of your choosing should validate all operating parameters
for each application.
Elaflex Hiby has made every effort to explain all servicing procedures, warnings, and safety precau-
tions as clearly and completely as possible. However, due to the range of operating environments, it
is not possible to anticipate every issue that may arise. This manual is intended to provide general
guidance. For specific guidance and technical support, contact your authorized supplier or specialist
service contractor.
Only approved original parts shall be used and no unauthorized modifications to the hardware shall
be made. The use of non-approved parts or modifications will void all warranties and approvals. The
use of non-approved parts or modifications may also constitute a safety hazard.
Information in this manual shall not be deemed a warranty, representation, or guarantee. For warranty
provisions applicable to this unit, please refer to the warranty provided by the supplier.
Every effort has been made to ensure the accuracy of this document. However, it may contain technical
inaccuracies or typographical errors. Elaflex Hiby assumes no responsibility for and disclaims all
liability of such inaccuracies, errors or emissions in this.
WARRANTY
Elaflex Hiby guarantees against defective materials and manufacturing for 18 months from date of
supply. If the delivery date cannot be established, the production date applies. The production date
is marked on the safety break body.
Excluded are safety breaks and parts subjected to wear and tear and damages caused by improper
use, for example the use with unsuitable media. Furthermore excluded are indirect damages and
costs, such as travelling related to exchange and repair work. We refuse any liability for consequential
loss or damage resulting from the use of our safety breaks.
TROUBLESHOOTING
•
Leackage
If uncontrolled and / or permanent gas release to the atmosphere occurs, immediately
stop fuelling
. Push emergency button of dispenser immediately, leave area and inform station
personnel. If area is safe, check tight connections to the safety break.
If self-service is not possible, please contact a service company specialised and certified in
LNG Service Station installations.
MAINTENANCE
The SB-LNG is a mechanical device that may become inoperative due to wear, corrosion and ageing
of components. Regular inspections and maintenance are essential for a safe operation.
Daily visual inspections of the safety break by trained personnel should be carried out to ensure
proper function.
The safety break shall be clean and not show any signs of damage ( e.g. dents or sharp edges ).
The safety break condition shall be thoroughly checked during the annual pump maintenance by
competent personnel. Applicable laws, regulations and Codes of Practice have to be followed.
Safety breaks in unfit condition for use must be immediately replaced.
Summary of Contents for SB-LNG
Page 11: ...20...