EN
NOTE!
The section concerning safety must be read and
understood by everyone who uses or repairs this
machine. The instructions describe operation and
maintenance measures that can be performed by
the operator. More detailed maintenance or trou-
bleshooting may only be performed by a qualified
professional or the manufacturer. The instructions
describe all necessary safety features and must be
read and understood by the user before connect-
ing the machine to the electrical supply. In other
words, the first action after delivery is to read
through the operating instructions.
There are symbols and warning labels on the
machine that are mentioned in the section on
“Safety”. If any of the warning signs on the ma
-
chine have become damaged or worn, new signs
must be ordered and fitted as quickly as possible in
order to ensure the greatest possible safety when
using the machine.
The machine may only be used for the purposes
described in this instruction.
The manufacturer reserves the right to make
changes.
APPLICATION AREA
The machine is intended for drying and heating
buildings where there is a need for temporary
heating, drying or air circulation.
the sides of Module 1. Check that these are not
damaged or deformed. The lifting eyes are only
designed to support the weight of the machine
itself.
TF 9EL EBC:
Position the machine in its desig
-
nated place. Connect the El-Björn metal air distrib-
utor. Connect the power cable to a fused 5-pin 16 A
socket that is protected by a residual current device.
TF 18EL EBC:
ts designated place. Lock the
wheels on the machine. Connect the power cable
to a fused 5-pin 32 A socket that is protected by a
residual current device.
TF 36EL EBC:
Position the machine in its des
-
ignated place. Lock the wheels on the machine.
Connect the El-Björn metal air distributor. Connect
the power cable to a fused 5-pin 63 A socket that is
protected by a residual current device.
TF 72EL EBC:
Position the machine in its des
-
ignated place. Lock the wheels on the machine.
Connect the El-Björn metal air distributor. Connect
the power cable to a fused 5-pin 125 A socket that
is protected by a residual current device.
INSTALLATION
CHECK BEFORE USE
That the machine is protected by a residual cur-
rent device.
That the filter is fitted and is clean and undam
-
aged.
That cables and connectors are undamaged and in
good condition.
That the metal air distributor is correctly connect-
ed and unobstructed.
That the wheels are locked.
Check that the machine is positioned at least 0.5 m
away from the wall.
That the machine always stands on a firm, level
surface.
INSTALLATION
In order to achieve the best drying and heating
performance, the machine should be positioned
as centrally in the room as possible. The machine
must run continuously in order to achieve optimal
results. Minimum distance from wall: 0.5 m. The
machine should only be used upright, with its
wheels/feet at the lowest point. If the machine is
to be suspended, use the 4 lifting eyes provided on
